Abstract:
A wind tunnel investigation to characterise the aerodynamic performance and aeroelastic response of a tiltrotor blade set operating in propeller mode is presented. A custom blade set was instrumented with fully bridged axial strain gauges to monitor the flap bending and torsional strain at several radial locations. Propeller thrust and torque measurements were acquired using a custom six component Rotating Shaft Balance. Measurements of blade tip deflection were obtained via stereoscopic Digital Image Correlation. Testing was performed at a range of rotational frequencies, blade pitch angles and advance ratios to assess the blade aerodynamic performance and aeroelastic response in both attached and stalled operating conditions. Strain measurements were shown to identify stall and blade eigenmode frequencies, where flap bending bridges show a more reliable capture of stalled flow than torsional bridges. Furthermore, blade tip deflection measurements were shown to reduce with increased advance ratio and excessive values of advance ratio resulted in negative thrusting at the blade tip.