Abstract:
Acoustic flight testing of rotorcraft often involves generating noise source hemispheres to gain an understanding about the aircraft's acoustic emissions. However, aerodynamically complex Urban Air Mobility and Future Vertical Lift vehicles may not maintain a steady aerodynamic state during flight, making source hemispheres measured using traditional linear arrays unreliable or difficult to interpret. To address this challenge, all emission angles need to be measured simultaneously. This has lead to the concept of the two dimensional `snapshot' array layout. A mathematically defined microphone distribution was utilized to achieve uniform coverage on the source hemisphere. Within the chosen distribution, two lower microphone count distributions are embedded, allowing for a comparison of the effects of number of microphones. The array was deployed as part of a joint Army/NASA acoustic research flight test in July of 2024. Data were collected using an MD530F helicopter as the test vehicle, executing both steady and unsteady flight. Analysis of the array resolution is used to determine adequate channel count and spatially varying sensitivity to array density.